82 miniaturized solid aluminium electrolytic capacitor with conductive polymer ultra esr high ripple current switchmode power supplies, computer, dc/dc converter noise suppression in smoothing / high-frequency circuits HPM series item characteristics operating temperature range (c) -55 ~ +105 voltage range (v) 2,5 ~ 6,3 capacitance range (f) 560 ~ 1 500 capacitance tolerance (20c, 120hz) 20% surge voltage rated voltage x 1,15 leakage current (a) the initial specifed value or less (20c, 2min) dissipation factor (20c, 120hz) the initial specifed value or less equivalent series resistance (20c, 100khz) the initial specifed value or less temperature characteristics z (+105c) / z (+20c) 0,75 stability at 100khz z z (-55c) / z (+20c) 1,25 stability at 100khz load life 2 000h, rated voltage applied at 105c capacitance change : dissipation factor tan : esr : dc leakage current : within 20% of the initial measured value 150% of initial specifed value 150% of initial specifed value the initial specifed value moisture resistance 500h, rated voltage applied at 60c, 90~95% rh capacitance change : dissipation factor tan : esr : dc leakage current : within 20% of the initial measured value 150% of initial specifed value 150% of initial specifed value the initial specifed value surge voltage characteristics 1 000 cycles at 105c, with u dc = 1,15 u r ( 30sec load / 330sec discharge) capacitance change : dissipation factor tan : esr : dc leakage current : within 20% of the initial measured value 150% of initial specifed value 150% of initial specifed value the initial specifed value hcp lower esr cd 284 xy HPM miniaturized v dc code rated capacitance max esr 20c, 100khz max ripple current 105c, 100khz dissipation factor 20c, 120hz leakage current size ? d x l (v) (f) (m) (marms) - (a) (mm) 2,5 0e 560 7 4 400 0,12 500 8 x 8 820 7 5 600 0,12 513 8 x 8 1 000 7 5 600 0,12 625 8 x 8 1500 7 5 600 0,12 750 8 x 8 4 0g 560 7 5 600 0,12 560 8 x 8 820 7 5 600 0,12 820 8 x 8 6,3 0j 680 7 5 600 0,12 857 8 x 8 custom products are available on request. ratings for HPM series polymer direct contact & support: jianghai europe gmbh +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2
8 part number system ec r 1c pt 101 m ff 2 0611 je xxxxx technology terminal type rated voltage code series code capacitance code (in f) capacitance tolerance lead form terminal/ pitch size dimension for specials only ec = electrolytic capacitor smd = v for coding please refer to the pages of ratings cd vs = bs 0,47 = r47 20% = m smd: 4x7 = 0407 radial = r cd vh = vh 1,0 = 010 10% = k taped = ff terminal = t2 5x11,5 = 0511 pc = polymer capacitor snap-in = s cd vz = vz 2,2 = 2r2 +30 / -10% = q radial: 6,3x11,5 = 0611 cd 261 = lk 100 = 101 +50 / -10% = t long lead = ll 2,0mm = 20 35x80 = 3580 cd 261x = qx 1 000 = 102 cut 5,0mm = cb 2,5mm = 25 45x100 = 45100 cd 262 = qm 10 000 = 103 cut , mm = cc 3,5mm = 35 cd 26 = bk cut 4,0mm = cd 5,0mm = 50 cd 269 = ph cut 3,5mm = ce 7,5mm = 75 cd 281 = ll cut 3,0mm = cf 10,0mm = 10 cd 28 = xy on request: alternative lead forms (axial, 90 - angle, others) 12,5mm = 12 cd 287 = gc cd 28l = ql snap-in: cd 29 = bz 4,0mm pin length = t4 2 pin = p2 cd 29 = bw 6, mm pin length = t6 3 pin = p3 cd 29 = bc soldering pin = s4 4 pin = p4 cd 296 = kc 5 pin = p5 cd 297 = bb preferred cd 299 = pg cd 29d = hr cd 29h = qh cd 29l = ql hcp = cp HPM = pm hvc = vc order code smd, radial, snap-in technical specifcation smd type dimensions ? d x l x , x , 6, x , 6, x 7,7 8 x 10, 8 x 11,8 10x10, 10x12,7 a 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 b 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 c 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 e 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 l 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 w 0,5 - 0,8 0,7 - 1,1 in mm size (dxl) w 0, a 0,2 b 0,2 p 0,1 t2 0,2 f 0,1 t1 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm taping dimensions diameter w d 4; 5 14 1 50 1 6,3 18 1 50 1 8; 10 25 1 50 1 polymer 25 1 80 1 in mm for more details or soldering profles of radials or polymer-capacitors please contact our local sales offces. allowable range of peak temperature size t (c) t (second) t 1 (second) ? 4 ~ 6,3 250 90 40 ? 8 x 10,5 240 90 30 ? 10 x 10,5 235 60 30 soldering profle (aluminium electrolytic capacitors) direct contact & support: jianghai europe gmbh +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2
9 part number system l l 7 l 11 ? d 3 4 5 6,3 8 5 6,3 8 10 12,5 16 18 20 22 25 f 1 1,5 2,0 2,5 3,5 2,0 2,5 3,5 5,0 7,5 10,0 12,5 ? d 0,4 0,45 0,5 0,6 0,8 1,0 a max 1,0 2,0 in mm dimensions for loose, long-lead type, (bulk) order code: ll dimensions for ammopack taping order code: ff (fd) code case range dimensions form ammopack ? d l (max) h 0,75 ho 0,5 f 0,5 p 0,1 ff 4 ~ 6 13 18,5 - 2,5 12,7 a 8 13 18,5 - 3,5 12,7 4 ~ 8 7 17,5 16 5 12,7 b 5 ~ 6,3 13 18,5 8 22 20,0 10 22 18,5 - a 12,5 27 18,5 - 15,0 fd 12,5 27 18,5 - 25,4 c ff 16 ~ 18 27 18,5 - 7,5 30,0 in mm dimensions for loose, short cut leads, (bulk) order code: cc (cb,cd,ce,cf) straight lead bended lead code cb cc cd ce cf i 5,0 0,5 4,5 0,5 4,0 0,5 3,5 0,5 3,0 0,5 in mm preferred form a form b form c technical specifcation radial type 2.5max direct contact & support: jianghai europe gmbh +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2
|
